All calibrations are done using CalMAN 5.1.2 software with an i1Pro meter and a C6 meter. Our targets are 200 cd/m^2 and gamma 2.2 for the pre-calibration and post-calibration measurements with the sRGB colorspace. We also try for 80 cd/m^2 and the sRGB gamma curve to see how well a display handles a more demanding professional setting.

  Pre-Calibration Post-Calibration,
200 cd/m^2
80 cd/m^2
White Level (cd/m^2) 325.75 199.38 81.14
Black Level (cd/m^2) 0.373 0.335 0.322
Contrast Ratio 874:1 595:1 252:1
Gamma (Average) 1.309 2.195 3.051
Color Temperature 6744K 6584K 6648K
Grayscale dE2000 7.853 0.589 1.100
Color Checker dE2000 7.611 0.942 1.000
Saturations dE2000 5.413 1.083 0.995

Running the Zero-G at Contrast 50 and Brightness 50 with the sRGB preset, these are the best numbers I could obtain without a calibration. Since we are targeting 200 cd/m^2 and not 325 cd/m^2, that makes the numbers worse since we are expecting it to be 200 cd/m^2.

We see the gamma is incorrect and there are large grayscale errors. If I adjust the Brightness to 0 we see a gamma that is still wrong, and a blue color shift that gives us an average color temp of 8797K. The contrast ratio also falls to 580:1 and overall performance is worse.

If you only look at the Color Gamut chart, everything looks nice. Switch to the Saturations chart and you’ll see that the 40% red saturation target is past even where 60% should be. Blue and Magenta are over-saturated as well. The color checker chart confirms these saturation errors. This is why using only the standard gamut chart, as many people and print magazines do, provides little insight into actual performance.

Out of the box, the Monoprice Zero-G offers weird, strange performance that I haven’t seen in a long time. It also offers proof of why a panel in a monitor is only a small part of what leads to a quality display.

Calibrate the Monoprice and you have a totally different display. Look at the numbers and they are virtually perfect. If you are targeting 200 cd/m^2 you will have trouble doing better except with contrast ratio and black level. Those are still worse than what other monitors can produce.

Calibrate for 80 cd/m^2 and an sRGB target and you’ll see that performance isn’t quite as good as the 200 cd/m^2 target. The reason is the brightness control. Below are images from the CalPC client that CalMAN uses to calibrate. You can see the default line (in black) and the adjustments made to Red, Green and Blue channels for different output levels. Ideally these should track the default line.

On the Monoprice they start out much lower on the right. Because we have to correct for the brightness levels in the LUT, instead of using the display controls, we lose dynamic range and contrast ratio. The black level doesn’t change but the white level is dropping. We also don’t have as much room for adjustment for the gamma curve, which is why the sRGB one suffers.

CalMAN has corrected a lot of the flaws in the Monoprice compared to the default settings, but it has to take a large hit to contrast ratio to do so.

Brightness and Contrast Display Uniformity
Comments Locked


View All Comments

  • Snoopykins - Monday, August 26, 2013 - link

    Wow! What timing! I just ordered one of these a few days ago. I paid $312 during a sale on monoprice. I'm not sure how one can compare that to a $485 monitor, even at the normal ~390 price point, it's still a 25% increase in price, which is pretty huge. They are often running sales and massdrop has these frequently as well, and when bought like that it's closer to a 40% price difference, which is astronomical.

    Anandtech has been my favorite tech news site for years and years, but this article is disappointing. This monitor does not target people looking at waiting for a dell to go on sale just to pay 600 dollars for it. This monitor targets people who were going to pay 200-250 for a LED backlit TN 1920x1080 panel, and then realized they could jump up to a 2560x1440 IPS without spending 3-4x as much.
  • FrozenDarkness - Monday, August 26, 2013 - link

    in a perfect world, all consumers make logical decisions when purchasing their products. People who buy LED backlit TN panels and know what a TN panel is probably bought it for gaming purposes. You just can't get the smoothness of a TN panel on an IPS.

    So I do think this is targeting people waiting on Dell to go on sale. The crowd who buys TN panels won't be interested in this regardless.
  • Snoopykins - Monday, August 26, 2013 - link

    I think there are people out there who do not buy TN panels out of ignorance, but simply because it is what they can afford. I know many people who buy TN panels who would love to have IPS instead, but can't afford the dollar per screen real estate. For years now it's been cheaper to buy 3 1920x1080 21.5" tn panels than a single IPS. Heck it still is that way in many cases. The exception has been the Korean Ebay monitors.

    That brings me to another point I forgot to make, the korean Ebay monitor scene. This also targets the people who didn't want to get burned buying a Catleap, Shimian, Crossover, Qnix, etc. That's actually a very large portion of people I've seen show interest in this monitor when I started researching it. Monoprice is a known, trusted company based in the USA. That's a pretty big selling point for many people.
  • greenlepricon - Monday, August 26, 2013 - link

    I'm definitely one of those people who can't afford a $600 monitor, and was unsatisfied with the cheap TN panels, even though the primary use of my monitor is for gaming. I settled with the Zero-G for $350, and it's such a huge upgrade to my $150 TN. To say gaming on a TN is better is completely personal preference. I don't play a ton of fast paced shooters, and prefer to enjoy the colors and high resolution in games I can get now. This panel has completely met my expectations as a cheap alternative to the Dells that can cost over 2x as much for what I consider marginal improvements and some nicer interfaces.

    For this article to recommend me something in a completely different price range is something that I can understand from the author, but is not what the review should conclude. I'm not gonna tell someone to get a $300 cpu when a $200 one will do just fine for them. The same goes for monitors. I can understand if this monitor was a piece of junk, but I've been using mine for nearly 2 months now and have enjoyed it immensely.
  • purerice - Monday, August 26, 2013 - link

    For those who have this monitor, how does the monitor appear to you at reduced brightness? Unless I misunderstood from the power usage and brightness pages, the monitor cannot reduce brightness much below the standard maximum. For me that would be a deal breaker because I use my existing monitor with a similar max brightness at or below 50% brightness more than half the time because it's easier on my eyes. In your experience, does reducing the brightness not work well or work but just degrade quality?
  • geforce912 - Monday, August 26, 2013 - link

    To Snoopykins... Ok so let me get this straight. Anandtech tested the monitor and it wasn't very good but you want them to say it is. Shouldn't they call it as it is and let you make your decision?
  • Mygaffer - Monday, August 26, 2013 - link

    I don't think that is what he was upset at, I think he disliked the whole "just spend $200 more" line, as $200 is 50% of the price of this monitor, which is already expensive.
  • cheinonen - Tuesday, August 27, 2013 - link

    I suggested looking at the Nixeus VUE 27, which can be found for $400 on sale or $470 normally, and the Dell U2713HM, which can be found refurbished for under $500 and for around $530-550 on sale normally. Neither of those is 50% more than the Monoprice.
  • sryan1372 - Thursday, August 29, 2013 - link

    I have to call shenanigans on this line of reasoning. You're comparing full MSRP of the Monoprice to significant sale prices on the other monitors. The first comment mentioned getting the monitor for $312, so there's no reason to assume that the Monoprice monitor's price is set in stone at the MSRP. Generally sales are going to be anchored to the MSRP (10% off, 20% off, etc.) so sales on the more expensive monitors will tend to have a higher lower bound than sales on Monoprice's offering. Of course Monoprice is likely working with significantly lower margins, and so might have less room for discounts, but that's not actually a knock against them in the comparison.

    I think that it would have been instructive to compare the monitor with similarly priced and lower priced offerings, rather than just monitors that are significantly more expensive. This would have necessitated stepping outside of strict class boundaries, but I think that's warranted in the case of this monitor. To wit, depending on how bad it is, you can think of a bad IPS monitor as a crossover between the world of super cheap, poor quality TN displays and expensive relatively higher quality IPS displays. I think that's the context that this monitor fits best into but this review hasn't included that context.
  • owan - Wednesday, August 28, 2013 - link

    I agree with Snoopykins that Anandtech has completely missed the mark on the target consumer for this product. When you compare this to a $850 monitor it seems terrible, when you're comparing it to a $120 TN monitor, the panel is so much better that the downsides might be worth it... Understand the difference?

Log in

Don't have an account? Sign up now