Western Digital 640GB - Twice the Platters, Twice the Fun
by Gary Key on March 21, 2008 3:00 AM EST- Posted in
- Storage
Test Setup
There's not too much to say about the test platform except it's fast. We are utilizing Vista 64-bit SP1 as our OS of choice now. We are still in the process of comparing our NVIDIA-based setup to the Intel X48 for future drive articles. However, performance differences between the two platforms are within 1% of each other with single drives. Native Command Queuing is enabled for all drives and the drive is formatted before each test run along with the prefetch folder being cleared. We run each benchmark five times and throw out the high and low test scores, then average the remainder for our results.
Quick Tests
We are providing PCMark Vantage results today along with initial acoustic and thermal results. The details about the PCMark Vantage HD suite tests and how results are determined can be located here. Our acoustic tests measure the decibel levels while the system is at idle and under load while running the Hard Disk test suite within PCMark Vantage. We take measurements at a distance of 5mm from the rear and front of the drive in a separate enclosure. The test room has a base acoustical level of 20dB(A).
Our thermal tests utilize sensor readings via the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) capability of the drives as reported by utilizing the Active SMART 2.6 utility. We also utilize thermal sensors and infrared measurement devices to verify our utility results. We test our drives in an enclosed case environment. Our base temperature level in the room at the time of testing is 24C.
The WD 640GB drive generates an excellent score in the PCMark Vantage tests that simulate real-world performance patterns utilizing a variety of actual applications. The Samsung F1 750GB drive sports a 32MB buffer while the WD 640GB "gets by" with a 16MB buffer that has been highly tuned for random seeks and small sequential block sizes. The WD 640GB drive leads in all PCMark Vantage categories except the Windows Defender and Media Center applications where the Samsung exhibits exceptional results. These scores reflect our own off-line application benchmark testing, where we saw similar results because the 32MB buffer greatly assists in the read performance of large data block sizes accessed in sequential order.
The one area that really disappointed us with the WD 320GB drive was its pitiful random access times at 16.4ms. After a lengthy conversation with Western Digital, we now understand why the drive performed so poorly in this test. This also explains the good but not great application results in general. Granted, the drive still performs well, but the initial specifications lead us to believe that performance should have been greatly improved over previous generation drives. Western Digital explained the single platter 320GB drive is aimed at the entry-level market where thermals and acoustics are critical for mass acceptance of the drive by the OEM and retail customers.
WD sacrificed a small amount of performance on the 320GB drive to meet these goals. This was by design and is not an indication of the performance potential of their new technology. In fact, these same 320GB platters will be used in single-sided form eventually for the 160GB drives. According to statistics, the 160GB drives have quickly replaced the 80GB products to become the new "sweet spot" in the general market. As the capacities increase, the typical user for these products normally expects a balance between performance, thermals, and acoustics. With that in mind, WD tuned the 640GB drive for additional performance at the expense of acoustics.
As far as acoustic testing, this drive posted excellent results, although thermals were higher than we expected considering the Samsung drive is carrying an additional platter and set of heads. Even during heavy seeks, noise levels remained muted, and at idle the drive's acoustical footprint was almost silent. The numbers suggest that the 640GB is very close to the 320GB drive in acoustics. In most ways it is, but we could definitely hear a difference in the seek operations between the two drives. The Samsung F1 offered similar acoustics to the WD SE16 640GB drive but during seeks the drive had a slightly heavier tone that showed up in the recordings.
In our first application tests (additional results are coming soon), the drive has performed slightly better than the Samsung F1 in areas such as program loading, gaming, and digital image manipulation. The WD drive is slightly slower in our Nero Recode 2 benchmark and at streaming multi-gigabyte files. This is due to the differences in buffer sizes at this point as far as we can determine. However, the differences between both drives are minor and are something that the majority of users would never notice. This drive excels in providing excellent acoustics and performance while thermal management is acceptable for this capacity range.
Just how well this drive compares to the latest competition in the 750GB range is something we will answer in the near future. Even at this point in testing, the WD Caviar SE16 640GB drive already has our tentative recommendation for users looking for a larger capacity drive for a gaming or audio/video/digital image workstation. The drive is very good, but we need to pound on it for the next several days under varying conditions along with additional analysis before we can give it our full recommendation.
40 Comments
View All Comments
Etern205 - Friday, March 21, 2008 - link
Excellent review as always.But I do wish WD would add 26GB more to that drive. XD
crimson117 - Friday, March 21, 2008 - link
I bet rather than solve the engineering problems, they'll just redefine "1 Terabyte" to mean "960 Gigabytes".strikeback03 - Monday, March 24, 2008 - link
I think they're fools if they put too much effort into stretching it to 1TB. Price the 960 appropriately and call it a day.Kaleid - Thursday, March 27, 2008 - link
Agreed. Better to focus on much higher than 320GB platters for the next gen. Heard rumours about 500GB / platters already from Samsung for instance. Aim high.960GB is just fine
chizow - Friday, March 21, 2008 - link
I highly doubt it given their past problems with rounding and published storage capacities. They'll just squeeze an extra 13GB or whatever onto each platter.mindless1 - Saturday, March 22, 2008 - link
Any platter density quoted includes spare sectors, to replace those that go bad. By inceasing total drive capacity you'd just have fewer spare sectors.chizow - Friday, March 21, 2008 - link
Just curious if you had any problems with the Samsung F1 and the NV 780i board. There's tons of comments about potential problems with the Samsung and NV chipsets (google or look at Newegg comments), but it might've ended with the 6-series. I'm personally running an F1 750GB but in order to do so I had to turn off NCQ. Otherwise the drive would eventually drop out and lock up the system under heavy load (FRAPs recording etc). Only a complete power down and cold boot would allow the drive to be recognized.I'd also like to know how you came to the conclusion the 750GB drive is the same as the 1TB drive, not because I don't believe you, just out of curiosity as there seems to be a good bit of confusion and contention about the number/size of platters on the 750GB version.
Arbie - Friday, March 21, 2008 - link
Multitasking is an area often skipped or dealt with briefly in hard drive comparisons, but for me it's very important. I decode and unRAR multiple large files simultaneously, which causes severe disk drive lags. My old Pentium 4 CPU remains lightly loaded, but the system is bogged down. I don't want to go to RAID in my next machine but I do want to choose drives with the best multitasking.Thanks
Arbie
mindless1 - Saturday, March 22, 2008 - link
Don't be a tool. Stop trying to unrar many things at once and let the performance be bound by the CPU. Same situation as with any use, you'd have same problem if you tried to simultaneously copy 3 different folders full of files from one place to another on the same drive.You don't need to go to raid that would be the wrong solution. You need multiple separate logical volumes for source and destination. You also need to upgrade the P4 CPU and be sure you're using RAR v3.6 or newer if compression/decompression performance matters.
Johnniewalker - Thursday, March 27, 2008 - link
@mindlessYour name fits.